Struggling with QuickBooks error 80070057 and don’t know what to do further? Well, this problem is quite common among various QuickBooks errors. They may end up with the text “The parameter is incorrect” while accessing the company file.
You must learn and understand the various facts associated with the issue. Through this post, you will get to know several unknown things about it. So, just move in.
QuickBooks Error Code 80070057: Briefly Explained
Let’s start the post by discussing what exactly is “Error Code 80070057 QuickBooks.” It is an annoying error that you come across while opening your company file. After getting this error your screen will flash -“The parameter is incorrect.”
This implies that you do not have sufficient permission to remove any file from a specific folder. This is because you can open/use/work on QuickBooks software in the multi-user mode only when you own rights of reading/writing and create/delete the QBs Company files kept in a particular folder.
So, fixing it is super important to resume your work. But to repair this error, you must understand why this issue takes place. Let’s learn the reasons behind the error.
Reasons Behind 80070057 QuickBooks Error
Understanding the reasons behind any error is important as it helps you learn the mistakes you did to give birth to an issue. By learning the causes, you could simply avoid the same error to take place in the future.
Here are some of the potential reasons due to QB Error 80070057 occur:-
- Damage Network Data Files: The .ND files are known as configuration files that keep information of the Company Files. This information is used to access via multi-user mode. It permits applications and programs to recognize the database server. This occurs when you attempt to shift or remove the .ND files on the server or system. After this, your QBs files change to unreadable files. So, it gives birth to 80070057 QuickBooks Error.
- Wrong Internet Security and Firewall Setting: There are chances that you have set up the Firewall or system security applications improperly. This obstructs the communication between QuickBooks and the Database Server leading to pop-up errors.
- If you try to access your company file directly through a shared folder then also this error can occur because only the main active computer and server contain the permission rights.
- The antivirus also blocks ports when data traffic between the systems.
- QuickBooks can’t read the company file due to changes in the extensions.
- Corrupt installation of QBs software.
- Invalid QBs extension liks: .Qbm, .Qbb, .Qbx.
- Utilizing a third-party firewall configured improperly.
- Opening a portable company file right before accessing the QBs software.
Symptoms to Identify QuickBooks Error 80070057
Sometimes users get baffled when they get this error because they can’t identify it properly. To apply the right solutions, read the symptoms below to recognize the Error 80070057.
- Your QuickBooks Program Windows begins to crash repeatedly.
- Slow or no response to mouse and keyboard inputs.
- A message reading – “The parameter is incorrect” comes on your screen.
- You don’t own permission to remove the files.
- The company file shuts down suddenly.
- The system crashes often and freezes.
Fixing QuickBooks Error 80070057: Proven Steps
You have successfully learned the causes and symptoms of this error, now, you can move to the part of the solutions.
Method 1: Updating QuickBooks to its Current Version
Before applying any solution, it is always recommended to update the QuickBooks to the newest version. This is because, when we update the software, it comes up with more tools, features, and bug fixes that ensure the smooth functioning of the software and fix various bugs. The steps to perform are:
- First of all, open the QBs software.
- After that, click on “Help.”
- Then, select “Update QuickBooks.”
- Now, tap on “Update now” and choose “Reset Update Box” to delete the old updates.
- Then, you need to choose “Get Updates” and tap on “Start QuickBooks Again.”
- In the end, confirm that QuickBooks Error 80070057 has been successfully repaired.
Method 2: Confirm the Extensions of the Company Files
- First of all, choose your Company file & right tap on it.
- Select “Properties.”
- Tap on “QuickBooks.”
- In the Filename, type the file extension and QuickBooks version.
- In the end, tap on “OK.”
Changing the Extension
- First, “Create a Fresh Folder.”
- Then, copy your Company file. Go to the freshly created folder and paste it there.
- Right-tap on the fresh folder and choose “Rename.”
- The following step is to give it a .qbm extension.
- Tap anywhere to save all modifications.
- Now, open the QBs application to restore the file.
- If you’re encountering trouble while launching the software, then rename the .QBM extension to .QBB.
- Then, open the software again and “Restore the Backup“.
- After that, if again your file doesn’t open then rename it to .QBX extension.
- In the end, open your QuickBooks software and start working.
Copy your Company File then Make A New Folder and Paste It There
- First of all, open “Windows Explorer.”
- Now open QuickBooks.
- Then reach out to “File” and right-tap on it. Choose “New Folder”.
- In the flash drive, copy “Companyfile.QBW” and paste it into the newly created folder.
- At last, open QuickBooks and then a new folder.
Method 3: Editing or Removing the .ND File
- First of all, reach out to Network Data (.nd) newly copied configuration files. You will find them in the folder of the QuickBooks Company.
- Now, check that all users have signed out. After that, exit from the QuickBooks application on all computers.
- Then, log in as the admin and visit the company file folder.
- Look for the file having .ND extension with errors.
- After finding the file with the error you have to either name it again or delete it. Doing this step will create the file automatically in both situations.
Method 4: Using QuickBooks Database Server Manager To Rescan
Note: You have to apply this method only if you utilize the company data over a network. Perform this method on your server
In the host system, open QuickBooks Database Server Manager. After that, scan the complete folder of QuickBooks company file.
- Reach out to “Taskbar” and tap on “QuickBooks Database Server Manager.” Then click on “Open.”
- If your company files are listed already:-
- Choose “Scan.”
- Tap on “Add Folder.”
- Visit the location of the folder, and choose the folder. Hit “OK.” After that, tap on “Scan.”
- Now, the scanning process will start reconfiguring “QuickBooks File Sharing Permission.” This will enable all systems to get the required permission that was causing the error related to Internet Settings and Firewall.
- In the end, open QuickBooks on the system, and the host computer shows Error 80070057 QuickBooks.
Method 5: Using QuickBooks File Doctor Tool
This tool is known for fixing numerous errors that occur in the software. Intuit created this repairing tool to repair company file issues. Check out the steps:
- Firstly, exit from QuickBooks desktop.
- Now, download the QuickBooks Tool Hub from the Intuit site.
- Then save the tool hub file.
- Tap twice on the “QuickBooksToolHub.exe file.”
- Follow the instructions popping on your screen to install. Also “Agree to the Terms and Conditions.”
- After the installation gets concluded, tap twice on the “Icon” to access the repairing tool.
- Now, select the “Company File Issues” section from the tool hub.
- In the end, tap on “Run QuickBooks File Doctor.”
Important: This step takes two minutes at least to access the file doctor. So, have patience.
- Inside the File Doctor Tool, pick the company file.
- If you can’t find it then tap on “Browse and search” to get the company file.
- Then, select “Check your file” and hit on “Continue“.
- In the end, fill in your “QuickBooks admin password.” Select “Next.”
- After concluding the scanning process, open QuickBooks and the company file to see if the problem is repaired or not.
Remember that the scan process will take time according to your file size. It can take 3 minutes to 5-6 minutes also.
Method 6: Reconfiguration of Bitdefender
- To initiate, open the menu of Bitdefender 10.0.
- Then, choose the Antivirus tab.
- You need to click on the Custom level icon.
- Also, opt for excluding path.
- Pick New Item from there.
- Make sure that you click on the mapped drive or UNC path.
- They will assist you in browsing the QB file.
Method 7: Configure the Firewall Settings
As firewall and other security software create issues within the system. So, we try to configure them through the steps below.
- Initially, you need to add exceptions to initiate the firewall configuration.
- Go through the instructions carefully and try to modify the changes.
- Now, the data will be easily sent and received.
- Just conduct the uninstallation and reinstallation of firewall software.
- Finally, check whether you can fix this issue or not.
Also Read: QuickBooks Install Diagnostic Tool
Method 8: Run QuickBooks as admin
If still, you are facing the issue then just run QuickBooks as an admin.
- To begin with, close the QB desktop.
- Perform a right-click on the QuickBooks icon.
- Select Run as administrator button.
- Open your QB file now.
- Finally, check whether the QuickBooks error 80070057 is fixed or not.
Method 9: Clean Installation of QuickBooks
The steps below will help you in conducting the clean installation of QuickBooks.
Step 1: Uninstall QuickBooks
- Hit Windows + R buttons to access the Run window.
- Specify the Control panel there.
- Also, choose Enter.
- Click on the Program Features and select Uninstall Program button.
- Pick QuickBooks from the list of installed programs.
- Hit on it and choose Uninstall.
- Go through the instructions that appeared on your screen to complete this process.
Step 2: Rename the Installation folder
Now, here comes the situation where you need to take some help from the QuickBooks clean install tool.
- So, first of all, just download the QuickBooks clean install tool.exe.
- Then, locate it on your system.
- Click on the I accept button.
- Pick the QuickBooks version.
- Also, choose Continue.
- If you see any text such as “QuickBooks is now ready for a clean install, please install in the default directory” then choose OK.
- Go to Windows Explorer to spot hidden files to rename every QuickBooks folder.
- Make sure to use an old or damaged extension to rename those folders.
- It will resist QuickBooks recognizing the folder for creating a new one.
Location of Folder
- C:\User\current user\Appdata\local\Intuit\QuickBooks
- C:\program files\Intuit\QuickBooks
- C:\program data\Intuit\QuickBooks
- For 64-bit version C:\program files (x86)\Intuit\QuickBooks
If you get an error text that rejects the error then consider these steps:
- To begin with, access the Windows Taskbar with right-clicking.
- Thereafter, choose Task Manager.
- Click the Image Name column header to sort out the alphabetical orders.
- Then, pick QBDBMgr.exe, QBDBMgrN.exe, Qbw32.exe, and QBCFMonitorService.exe.
- After that, click on End Process.
- A new text will prompt then just hit OK there.
These are all the experts’ proven methods for QuickBooks error 80070057. We hope that you are working smoothly on your system without receiving any error messages or codes. However, if you find any other problem further then make sure to consult our experts. You are only required to drop your concern below to get the best possible answers from our experts. If you are a new user of QuickBooks and want to know more about this software then hit the notification icon for getting regular updates and posts.